Rib Lath

We are the professional manufacture of rib lath, angle bead, high ribbed formwork,coil mesh ,diamond mesh (expanded metal lath) ,expanded wire mesh etc. We can supply the products with all kinds of specifications. Rib lath products includes embedded steel lath type form "rib lath", excellencies of rib lath, and rib lath machine.

1、Embedded Steel lath type Form ＂Rib Lath＂

 

Our Rib Lath has been developed to contribute to reduce cost, work time, volume & wastes and to improve the quality of concrete, working safety and plastering work for the best quality of the building, and to prevent insufficient construction work.And our Rib Lath has been accepted as a specification by the Korean Housing Corporation since 1999.
 

2、Excellencies of Rib Lath

Rib Lath must be installed horizontally against the floor and projected side of Rib must be installed to face towards the placed side because the projected side of Rib and the placed part become enbloc to prevent the surface from cracking and to get the placed side to stand the lateral pressure better than the other side.
 

Overlapped Length of Rib Lath is about 100㎜ horizontally to stick one past to the other at 2 points of each side of RIB as you can see in the picture.
 

Vertical overlapping of Rib Lath is basically overlapped and bound each other between upper and lower side. Ribs firmly with reinforcing steel as you can see in the picture.
 

If the placed side has angles or is to be cut, then put the part to be bent on the angle steel and make the Rib side flat by hammering. And then bend RIB to an angle as required.
 

3、Rib Lath Machine

 

Rib lath machine can make stainless steel rib lath and galvanized steel rib lath.